Knowledge, Attitude, and Practice of Hepatitis B Vaccination among Dentists in Lebanon.

BACKGROUND: The hepatitis B virus (HBV) is a serious occupational hazard for healthcare workers, including dentists. The purpose of this study is to assess dentists' knowledge, attitude, and practice (KAP) with respect to hepatitis B vaccination. MATERIALS AND METHODS: A cross-sectional survey of a representative sample of dentists (n = 349) from Lebanon was carried out. Participants' knowledge of hepatitis B, attitudes toward vaccination, and immunization habits were assessed using a standardized questionnaire. To examine the data, descriptive statistics were used, and associations between variables were investigated using appropriate statistical tests. RESULTS: The study found that most participating dentists are HBV-vaccinated. These dentists boast a basic to a significantly substantial understanding of HBV infection prevention strategies, such as immunization, routine preventive measures, and handling equipment. Notwithstanding the generally positive attitudes towards vaccination, a proportion of dentists lacked some HBV prevention practices, specifically with respect to conducting regular follow-ups of anti-HBs titer levels and getting booster vaccination doses when warranted. CONCLUSION: This study sheds light on the KAP of hepatitis B immunization among Lebanese dentists. The findings emphasize the significance of focused educational efforts in view of improving awareness and encouraging a more thorough understanding of the benefits of vaccination. The study provides useful data that can be used to influence public health policies as well as activities aimed at increasing hepatitis B vaccination rates among dental professionals in Lebanon. How to cite this article: Yared G, Sokhn ES, Al-Khatib A, et al. Knowledge, Attitude, and Practice of Hepatitis B Vaccination among Dentists in Lebanon. J Contemp Dent Pract 2024;25(2):134-140.

Effect of Modified Triple-Layer Application on the Bond Strength of Different Dental Adhesive Systems to Dentin.

The goal of this article was to assess the effect of modified triple-layer application (MTLA) in conjunction with the active bonding technique on the bond strength of four adhesive systems to dentinal substrate. The adhesives tested were Prime&Bond Universal (PBU), OptiBond Universal (OBU), OptiBond FL (OBFL), and Clearfil SE (CSE). The adhesives were applied according to the following strategies: single active application (A) and triple adhesive layer application including Active-Passive-Passive (APP); AAP; and AAA. The micro-tensile bond strength test was evaluated following 24 h or 6 months of storage. The composite-dentin interface morphology was investigated using scanning electron microscopy. The data were statistically analyzed with a significance level of α = 0.05. At 24 h of aging, all of the factors tested were not significant (p > 0.05) for CSE. For OBFL, OBU, and PBU, statistically higher values were observed for the A technique (p < 0.05). Plus, there were no significant variances between the APP, AAP, and AAA techniques (p > 0.05) for OBFL and PBU. However, for OBU, there were no significant differences between the A and AAA techniques (p > 0.05). After 6 months of aging, the A technique showed statistically higher values when compared to the other techniques (p < 0.01), except for OBFL, where the A and AAA techniques showed promising outcomes. When comparing the bond strength values of 24 h and 6 months, only for PBU, all of the techniques used resulted in bond strength stability over time (p > 0.05). Thicker adhesive layers were observed when MTLA was applied. Only the OBFL adhesive showed the formation of resin tags in all of the modalities tested. The bonding performances of the different application techniques used were material-dependent.

Effectiveness of Different Application Modalities on the Bond Performance of Four Polymeric Adhesive Systems to Dentin.

One of the major goals of adhesive dentistry is to improve the interaction of the already-existing adhesives with different substrates by using different application techniques. Thus, the objective of the present in vitro study was to assess the bond performance of four adhesive systems, Prime&Bond Universal (PBU), Clearfil SE Bond (CSE), OptiBond Universal (OBU), and OptiBond FL (OBFL), to dentin using various application modes: passive application (PA), active application (AA), Compo-Vibes modified application (CVM), and Compo-Vibes application (CV). Eighty extracted human molars were allocated into four groups based on the application modalities tested. The micro-tensile bond strength as well as fracture mode were tested in accordance with ISO/TS 11.405 after 24 h and 6 months of aging. Adhesive contact angle (CA) and scanning electron microscope analysis were also performed (n = 3). Statistical tests were performed with α = 0.05. After 24 h, a significant difference with a higher bond strength value was found for PBU in the AA modality and for CSE in the CVM modality (p < 0.05). However, no significant difference was shown between the techniques used among the other adhesives (OBFL and OBU). Moreover, at 24 h, only the PA demonstrated significant differences between the tested materials (p < 0.05). After 6 months, CSE, PBU, and OBU demonstrated significant differences between the techniques (p < 0.05), with a higher bond strength for CSE in AA and CVM modalities, for PBU in AA modality, and for OBU in AA and PA modalities. No significant differences were found between the techniques used among the OBFL (p > 0.05). In addition, only the CVM technique demonstrated significant differences between the tested materials after 6 months. CV and CVM showed a decreased value after aging for CSE and PBU, respectively. However, all the modalities decreased for OBU and OBFL after aging. All the adhesives showed marked resin infiltration into dentinal tubules in AA among all the modalities tested. Both universal adhesive systems (OBU and PBU) demonstrated statistically lower CA when compared to the other systems (CSE and OBFL) (p < 0.05) when applied in the PA mode. Concerning the AA mode, only CSE and OBFL were tested. The AA demonstrated lower CA values compared to the same adhesives in PA (p < 0.05). It could be concluded that the bond strength could be influenced by both materials and application techniques. It seems that the AA technique could be recommended as a gold standard for the application of an adhesive system to dentin. Plus, the CV and CVM modalities after 6 months of aging were considered stable for PBU and CSE, respectively. Consequently, the performance of these adhesive systems might vary when applied to other modalities. Future studies are needed to test this hypothesis.

In vitro evaluation of the color stability and surface roughness of a new composite flow.

Background: The aim of this study was to evaluate the color stability and the surface roughness of a bulk-fill composite flow (SDR® Plus) by comparison to an ORMOCER-based composite (Ceram.x® Universal SphereTEC™) in order to confirm the validity of using SDR® Plus in the anterior region and to allow the prediction of its long-term results. Material and Methods: 35 composite specimens of the same shade (A2), thickness (2mm) and shape of both types of composite were prepared. The specimens were cured and polished according to the manufacturer's instructions. The initial shade of the specimens was measured using a calibrated EasyShade spectrophotometer. The initial surface roughness of the specimens was measured by AFM. Afterwards, the specimens were subjected to an accelerated aging procedure through thermo-cycling, a coffee stain challenge and brushing to simulate two years in the oral environment. The shade and surface roughness of the specimens were measured again after the accelerated aging procedure. Results: The mean ΔE was significantly larger than 3.368 in Ceram.x® group (-p-value<0.001) and SDR® Plus group (-p-value<0.001). The mean surface roughness has significantly increased for both groups after aging with no significant difference between the two groups. It however remained clinically acceptable. Conclusions: SDR® Plus and Ceram.x® showed similar surface roughness when subjected to the same testing conditions. Concerning the color stability, both composites displayed noticeable discoloration, with higher ΔE values registered for Ceram.x®. Key words:Composite resins, spectrophotometry, atomic force microscopy, dental material, resin-based material.

Triple scan evaluation of internal and marginal adaptation of overlays using different restorative materials.

OBJECTIVE: Problems in the confection of indirect restorations may increase the marginal and internal gap. This study aimed to quantify the marginal and the internal fit of overlays fabricated with three different materials. MATERIALS AND METHODS: Standardized cavities were prepared on endodontically treated human third molars and digital impressions were done using an intraoral camera (Trios 3). Restorations were designed (n = 15) and fabricated with three materials: Hybrid ceramic (Cerasmart; GC Corp, EUROPE), high-strength lithium disilicate (GC Initial® LiSi Press; GC Corp, Tokyo, Japan), and zirconia reinforced Lithium Silicate Glass Ceramic (Vita Suprinity; Vita, Germany). Axial, marginal, pulpal, and gingival gaps were calculated by measuring the distance between the restoration and the tooth at several reference points. Two-Way analysis of variance was used for statistical analysis. The significance level was set at α = 0.05. RESULTS: Mean gap was significantly influenced by the material (p < 0.001), gap localization (p < 0.001), and interaction between the factors (p = 0.002). For all materials, the highest gap was observed at gingival and pulpal surfaces (p ≤ 0.015). LiSi Press achieved the overall lowest values at axial values measurements (p ≤ 0.003). CONCLUSIONS: The performance of a CAD/CAM system relative to marginal adaptation is influenced by the restorative material used. High-strength lithium disilicate seems to be showed the best marginal adaptation. CLINICAL SIGNIFICANCE: Marginal and internal adaptation of CAD/CAM restorations could be influenced by the type of material chosen.

Response of dental pulp capped with calcium-silicate based material, calcium hydroxide and adhesive resin in rabbit teeth

Direct pulp capping induces a local inflammatory process. Several biomaterials have been used for this procedure. The aim of this study was to compare the dentinal bridge thickness using three different pulp capping biomaterials with the conventional technique (high speed diamond bur) or Er-Yag laser, 1 month after pulp effraction. Materials and Methods: Forty two Class V cavities were prepared on the buccal surface of 4 maxillary incisors and 2 mandibular incisors of New Zealand rabbits. Specimens were divided into 6 treatment groups. Teeth were treated with: In Group 1: Er-Yag laser and Biodentine® (Septodont), in Group 2: Er: Yag laser and calcium hydroxide (Dycal® Dentsply), in Group 3: Er: Yag laser and adhesive system (Prime& Bond® NT Dentsply), in Group 4: high speed diamond bur and Biodentine® (Septodont), in Group 5: high speed diamond bur and calcium hydroxide (Dycal® Dentsply), and in Group 6: high speed diamond bur and adhesive system (Prime& Bond® NT Dentsply). The preparation was done with copious irrigation. The animals were sacrificed at 30 days and the teeth were extracted and prepared for histological analysis. Results: In the group of « laser Er-Yag ¼, iatrogenic pulpal wounds treated with Biodentine® were covered with a thick hard tissue barrier after 1 month. The difference was not significant with the groups of Dycal® used with Er: Yag laser and high speed diamond bur. Prime& Bond® NT Dentsply specimens showed a thin dentinal bridge layer. Conclusion: At 1 month, Er-Yag laser proved to be useful with Biodentine® for direct pulp capping procedures

Adhesion of Resin to Lithium Disilicate with Different Surface Treatments before and after Salivary Contamination-An In-Vitro Study.

The salivary contamination occurring at the try-in procedures of lithium disilicate (LDS) can jeopardize their bond strength. Various laboratory reports have concluded that applying 37% phosphoric acid (H3PO4) could be considered as a predictable way of removing salivary contaminants. An experimental method that consists of sealing the intaglio of the ceramic restorations with a layer of cured adhesive could allow consequent time saving for dental practitioners. It is, besides, necessary to establish an optimal decontamination protocol. Hence, this study aimed to determine the most efficient surface treatment, before and after salivary contamination, by comparing the adhesion between resin and LDS. In order to do so, five groups of ten specimens (n = 10) each underwent the different types of surface treatments before bonding, followed by 2500 cycles in the thermocycler. A shear bond strength (SBS) test was then conducted on a universal testing machine (YLE GmbH Waldstraße Bad König, Germany), followed by a fracture-type analysis on an optical microscope (Olympus BX53, Shinjuku, Tokyo, Japan). Statistical analysis was set with a level of significance of α = 0.05. The surface treatment significantly affected the SBS results. The decontamination with HF (12.59 ± 2.71 MPa) and H3PO4 (13.11 ± 1.03 MPa) obtained the highest values, silanizing only before contamination obtained intermediate values (11.74 ± 3.49 MPa), and silanizing both before and after the salivary contamination (10.41 ± 2.75 MPa) along with applying a bonding agent before contamination (9.65 ± 1.99 MPa) resulted in the lowest values. In conclusion, H3PO4 proved to be efficient, thus, allowing the practitioner to avoid the clinical use of HF; it can, therefore, be considered as a valid alternative. Presilanization and resilanization of specimens, along with applying a bonding agent before contamination, did not yield satisfying results.

Accuracy of Dental Photography: Professional vs. Smartphone's Camera.

There is a scant literature on the accuracy of dental photographs captured by Digital Single-Lens Reflex (DSLR) and smartphone cameras. The aim was to compare linear measurements of plaster models photographed with DSLR and smartphone's camera with digital models. Thirty maxillary casts were prepared. Vertical and horizontal reference lines were marked on each tooth, with exception to molars. Then, models were scanned with the TRIOS 3 Basic intraoral dental scanner (control). Six photographs were captured for each model: one using DSLR camera (Canon EOS 700D) and five with smartphone (iPhone X) (distance range 16-32 cm). Teeth heights and widths were measured on scans and photographs. The following conclusions could be drawn: (1) the measurements of teeth by means of DSLR and smartphone cameras (at distances of at least 24 cm) and scan did not differ. (2) The measurements of anterior teeth by means of DSLR and smartphone cameras (at all distances tested) and scan exhibited no difference. For documentational purposes, the distortion is negligeable, and both camera devices can be applied. Dentists can rely on DSLR and smartphone cameras (at distances of at least 24 cm) for smile designs providing comparable and reliable linear measurements.

Influence of Resin Cement Thickness and Elastic Modulus on the Stress Distribution of Zirconium Dioxide Inlay-Bridge: 3D Finite Element Analysis.

The mechanical properties and the thickness of the resin cement agents used for bonding inlay bridges can modify the clinical performance of the restoration such as debonding or prosthetic materials fracture. Thus, the aim of this study was to evaluate the stress distribution and the maximum strain generated by resin cements with different elastic moduli and thicknesses used to cement resin-bonded fixed partial denture (RBFPD). A three-dimensional (3D) finite element analysis (FEA) was used, and a 3D model was created based on a Cone-Beam Computed Tomography system (CBCT). The model was analyzed by the Ansys software. The model fixation occurred at the root of the abutment teeth and an axial load of 300 N was applied on the occlusal surface of the pontic. The highest stress value was observed for the Variolink 0.4 group (1.76 × 106 Pa), while the lowest was noted for the Panavia 0.2 group (1.07 × 106 Pa). Furthermore, the highest total deformation value was found for the Variolink 0.2 group (3.36 × 10-4 m), while the lowest was observed for the Panavia 0.4 group (2.33 × 10-4 m). By means of this FEA, 0.2 mm layer Panavia F2.0 seemed to exhibit a more favorable stress distribution when used for cementation of posterior zirconium-dioxide-based RBFPD. However, both studied materials possessed clinically acceptable properties.

Shelf Life and Storage Conditions of Universal Adhesives: A Literature Review.

This paper presents state of the art universal adhesive systems and the effect of shelf-life and storage conditions on their bond performance. Three topics are explored in this review: an introduction to the topic, the mechanisms responsible for the degradation of the hybrid layer, and the factors that play a role in the stability of universal adhesives. In addition, issues such as potential durability and clinical importance are discussed. Universal adhesive systems are promising but must be handled and stored according to the manufacturer's instructions, with careful attention given to the details of shelf-life and storage conditions for maximal success. It appears that the components of universal adhesives play an important role in their stability. Furthermore, HEMA-free formulations using methacrylamides lead to longer shelf-life. Further research is needed to prove these hypotheses.

Effect of Inlays, Onlays and Endocrown Cavity Design Preparation on Fracture Resistance and Fracture Mode of Endodontically Treated Teeth: An In Vitro Study.

PURPOSE: To evaluate the fracture resistance and failure modes of endodontically treated mandibular molars restored with different designs of inlays, onlays and endocrowns. MATERIALS AND METHODS: Extracted mandibular third molars (n = 180) were used. An access cavity was prepared on the occlusal surface of each tooth and the roots were obturated with gutta percha. All specimens were randomly divided into 6 groups (n = 30/group) according to the cavity design and the restoration material used. C: control group without access cavity preparation. IE: MOD inlay preparation with EverX Posterior (GC Europe) in the pulp chamber. IG: MOD inlay preparation with G-aenial Universal Flo (GC America) in the pulp chamber. OE: onlay preparation with EverX Posterior (GC Europe) in the pulp chamber. OG: onlay preparation with G-aenial Universal Flo (GC America) in the pulp chamber. EC: endocrown with an empty pulp chamber. All restorations were fabricated with CAD/CAM system using CERASMART® (GC Dental products Europe, Belgium) CAD/CAM blocks. Specimens were thermal-cycled and were subjected to a compressive load applied at 30° angle relative to the long axis of the tooth with a universal testing machine. Results were statistically analyzed by ANOVA followed by Tukey post hoc tests. Chi-square test and Fisher Exact tests were used for the comparisons among groups. RESULTS: The mean fracture strength was significantly different between the groups (p < 0.001); it was significantly highest for intact teeth, followed by endocrowns (p = 0.021). The strength was significantly lower for inlays (with G-aenial Universal Flo and EverX Posterior), intermediate for onlays with EverX Posterior followed by onlays with G-aenial Universal Flo. CONCLUSIONS: Endocrowns exhibited higher fracture resistance than other tested composite resin groups. Endocrowns and onlays showed a more favorable failure mode than inlay restorations.

Clinical, histological, and histomorphometrical analysis of maxillary sinus augmentation using inorganic bovine in humans: preliminary results.

The aim of the present study was to evaluate bone formation after maxillary sinus augmentation using bovine bone substitute material Bio-Oss alone by means of clinical, histological, and histomorphometrical examination of human biopsies. Deproteinized bovine bone (DPBB, Bio-Oss) was used to fill cavities after elevation of the sinus mucosa following major sinus pneumatization. Twenty patients with edentulous posterior maxillae were treated with 20 sinus augmentation procedures using a 2-stage technique. Residual lateral maxillary bone height was less than 3 mm. Forty-nine Straumann endosseous implants were used to complete the implant-prosthetic rehabilitation. Forty cylinder-shaped bone biopsies were taken from the augmented maxillary region 8 months after grafting during the second-stage surgery before implant placement. All implants were loaded 3 months after insertion, and no failures were recorded. Histomorphometrical analysis showed an average percentage of newly formed bone of 17.6% (± 2.8%) and a proportion of residual bone substitute material of 29.9% (± 4.9%) of the total biopsy area. Intimate contact between newly formed bone and Bio-Oss was detected along 28.2% (± 6.8%) of the particle surfaces. The results also showed that in all cases, the DPBB granules had been interconnected by bridges of vital newly formed bone. Inorganic bovine bone appears to be biocompatible and osteoconductive, and it can be used with success as a bone substitute in maxillary sinus augmentation procedures.